Subcategories

• Hydraulic Oil

  Good quality hydraulic oils manufactured from highly refined base oils incorporating modern additive technologies.Viscosity Grades include:ISO 5, ISO 10, ISO 15, ISO 22, ISO 32, ISO 46, ISO 68, ISO 100, ISO 150, Hydraulic Oils Available to HM and HV standards. Fire Resistant and Food safe products also available. All Mobil Hydraulic Oil is also available.
  
  Now available HYDRAULIC OIL 37! A pre ISO Hydraulic Oil!

  All Products have the following attributes

  • Good antiwear, anticorrosion, antirust and antifoaming properties
  • Low pour point
  • Low air retention
  • Good filtration even in the presence of water
• Industrial Gear and...

  General Lube Oil, Lubron and Mobil products available. Covers a full range of industrial gear and slideway oils. 

  All products can be purchased singularly or in packs of - 

  • 12x1L
  •  4x5L
  •  pallets of 20L's
  •  pallets of 205L's

  Industrial Range:

  A full range of both Extreme Pressure (EP) and Non EP gear oils. To suit all industrial applications in vicosities from ISO 32 to ISO 1000. Other grades are available on request.

  All manufactured from the highest quality base stocks with the finest additive packages available.

  To conform to approved International specifications.

  Special grades are available for use in hot environments and for food usage.
• Cutting and Soluble Oils

  Our company produces a range of high quality Soluble Oils and Cutting Oils.

  Lubron has its own high quality oils, but also sells Mobil equivalent branded Soluble and Cutting Oils.

  Soluble Oils

  Machine Cleaner- This advanced cleaner is a combined machine tool coolant, sump cleaner and bacteriacode. It contains a bacteriacideproven highly effective in controlling growth of bacteria commonly found in contaminated water - mix fluids. These bacteria's are generally held responsible for unpleasant "Monday Morning Odour". Machine tool cleaner also contains a very effective detergent action and will flush out any accumulated material in the system. Dilution: use at 1%

  Alexsol 40MB - This product is a odourless non phenolic soluble oil producing, producing a rich milky white emulsion when mixed with water. Suitable for all general maching applications. Use at a dilution ratio between 3 and 10%. Always add the soluble oil to water when mixing.

  Biocut FG - This is a fully bio-stable semi synthetic soluble cutting fluid which has been developed to be suitable for a wide range of waters. This flexibility in different waters makes it an ideal product to use where higher than normal fluid velocities are used. In these conditions biocut fg will have a low foaming tendency by virtue of its component chemistry. The semi-synthetic formulation of biocut fg gives stable emulsions over long periods even in different envionments created by bacterial attack or tramp oil contamination. The inclusion of more than 40% mineral oil gives an optimum balance of stability, machining performance, foam and machine tool corrosion protection together with very fluid residue. Biocut fg is an ideal general purpose semi-synthetic fluid suitable for multiple operations on various machine tools lending itself to grade rationalisation from grinding to c.n.c machining centres.All non ferrous materials including stainless steel and most non ferrous materials. It forms a semi-translucent emulsion when mixing with water. Recommended concentration: general machining 3% - 6% - Grinding Including centreless 2% - 5%

  Anti-Foam No 4 - Anti-foam is a silicone based anti-foam agent designed for the use in water soluble coolant systems. The addition of anti-foam will not inhibit the soluble oil being used.

   

  Cutting Oils

  Lubron Oils range of neat cutting and forming oils have been developed and formulated from practical experience in the metalworking industry, using traditional and futuristic additive technologies. This range of products covers the majority of metal cutting and forming operations found in the engineering workshop today. As with all metal working applications, individual operations can need special formulations to produce components efficiently by designing the formulations to be compatible with the Lubron Advanced Technology range of futuristic metalworking

  additives, individual formulations can lie, if needed, modified on site to give optimum performance and productivity.

   

  Pipe Threading Oil - A blend of high grade mineral oils suitable for all pipe threading applications. Excellent thread finish and prolonged die life.Water washable-chloride freeComplies with Health and Safety legislation.

   

  TNT Base Neat Cutting Oil Booster - An additive package loaded with Sulphur and other lubricity additives used to booster neat cutting oils.

   

  EDM Fluid (Spark Erosion) - Is a carefully selected fluid suitable for most types of machines, particularly odourless in operation.

   

  Deep Drawing Oil - Is used for medium and severe draws in producing light and heavy gauge sheet metal parts, particularly when intricate die designs and severe draws might cause splitting and galling. 

   

  All products come singular 1L,  5L,  20L,  205L and IBC's

  Also come in packs of 4X5L's, pallets of 20's, and pallets of 205L's  

• Heat Transfer Oil

  Heat Transfer Oil is a light viscosity oil developed for liquid phase heating systems (oil jackets), inhibited with anti oxidants and added corrosion inhibitors. Gives good service life and minimum sludge over a wide temperature range.

  Two different grades 32 and 100

• Compressor Oil

  AIRCOMP COMPRESSOR OIL AND VACUUM PUMP OIL

  Aircomp is recommended for oil flood rotary and screw trype compressors. It is suitable for both static and mobile plant, and can be used in compressors operating in ambient temperatures ranging from 25 degrees C to 40 degrees C. D.I.N. 51506

  Compressor Range-

  AIRCOMP 32 is recommended for oil-flood rotary and screw-type compressors. It is suitable for both static and mobile plant, and can be used in compressors operating in ambient temperatures ranging from -25 °c to 40 °c. D.I.N. 51506 V.D.L.

  AIRCOMP 46 is formulated primarily for the extremely arduous working conditions of reciprocating - type air compressors and is particularly suited to units with delivery temperatures up to 200 *c. D.I.N. 51506 V.D.L.

  AIRCOMP 68 is formulated primarily for the extremely arduous working conditions of reciprocating - type air compressors and is particularly suited to units with delivery temperatures up to 200 ⁰c. D.I.N. 51506 V.D.L.

  AIRCOMP 100 meets the same exacting standards as Aircomp 68 but is of a higher viscosity. D.I.N. 51506 V.DX.

  AIRCOMP 2000 this compressor oil is specifically designed at Vane type compressors where detergency and added wear additives are required. Aircomp 2000 is formulated to last for 2000 hrs before change. S.A.E. 40.D.I.N. 51506 V.C.L

  VACUUM PUMP OIL 30- Is a general purpose vac pump oil which covers most applications, except in food related applications.
  

  All products can be bought singulaly or in packs of-

  • 4x5L
  • pallets of 20L's
  • pallets of 205L's
  • IBC's

  1LTR bottles can be provided on demand.

• Turbine Oil

  The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required. Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks and an additive system which provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and a high resistance to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good antiwear properties. They have a high viscosity index which ensures minimum variation of film thickness with temperature and minimum power loss during the warm up period. These grades have excellent air release properties which allow entrained air to separate, thus avoiding pump cavitation and erratic operation.
  
  Mobil DTE Oil Named are the lubricants of choice for many users because of their reputation for long life, excellent equipment protection and outstanding versatility in the wide variety of industrial applications. DTE Oil Named lubricants are used widely in steam turbines and hydroturbines with splash, bath and ring-oiling arrangements, and all other continuous circulation methods involving pumps, valves and ancillary equipment. This product series is recommended for continous service in the lubrication of plain and rolling bearings and parallel shaft gearing. They have also been used successfully in some gas turbine and rotary air compressor applications, as well as vacuum pumps. Their reputation is based on many decades of successful service and satisfied users
   
  Available on demand in a range of 1L's, 5L's, 20L's and 205L's

• Transformer Oil

  Please call 01536 201555 for pricing in a range of 1L's, 5L's, 20L's and 205L's

• Industrial Bumper Box

  Industrial Bumper Box

  Please call 01536 201555 for pricing.

• Greases

  Greases can be found in the Greases Section and also the Garden Greases Section.

• Machine Tool Lubricant...

  MACHINE TOOL LUBRICANTS EQUIVALENTS GUIDE
  
  Click on the company below to view lubricants equivalents guide.

  • SHELL

  • MOBIL

  • CASTROL

  • ESSO

  • BP

  • TEXACO

  • DUCKHAMS

   

  All equivalents are compiled from past technical  information supplied by the oil companies listed
  and my knowledge to decipher that data.
  
  Note : Equivalents are not always an exact copy, but will give similar results and performance criteria.

  We can produce the oils in sizes from 1L, 5L, 10L, 20L TO 205L